Skip to content

Battery Monitors

Matson MA98415

Mostly supported
Mostly supportedMissing a few features, but it should be enough to cover essential daily tasks.
No-vendor pairInitial pair can be done in Gadgetbridge without needing the proprietary vendor app.

device__matson_ma98415

has_flag__feature_most

has_flag__pair_free

Support for BM2 Battery Monitors was added based on feedback from issue #6212.

It's very likely that other battery monitor devices are supported, you can try to use Pairing unsupported gadgets to pair an unsupported battery monitor. If it works, please open an issue or reach out on Matrix and provide the bluetooth name, so we can enable official support for it.

Bluetooth name: MATSON Monitor

Supported features:

  • Battery level
  • Battery voltage

BM6

Mostly supported
Mostly supportedMissing a few features, but it should be enough to cover essential daily tasks.
No-vendor pairInitial pair can be done in Gadgetbridge without needing the proprietary vendor app.
ExperimentalAs we don't have that device it is not known if it works correctly. You can help us by testing yourself!

device__bm6

has_flag__feature_most

has_flag__pair_free

has_flag__experimental

Not yet released

Support for this gadget has been added to Gadgetbridge's codebase, but is not yet released. It is already available in the nightly releases.

Support for BM6 Battery Monitors was added based on feedback from issue #6236. It is not tested.

If you got a BM6 battery monitor and can confirm it works, please provide feedback on the issue issue #6236 or reach out on Matrix, so we can unmark it as experimental.

Bluetooth name: BM6

Supported features:

  • Battery level
  • Battery voltage
  • Battery temperature (with charts)

Victron SmartShunt

Mostly supported
Mostly supportedMissing a few features, but it should be enough to cover essential daily tasks.
Requires configuration with proprietary appYou need to pair with VictronConnect first and enable GATT.

device__victron_smartshunt

has_flag__feature_most

has_flag__pair_victron

Support was added based on feedback from issue #6263.

Requirements:

  • Firmware version v2.31 or above
  • Enable "GATT" in official app settings (VictronConnect v5.42 or later)

Supported features:

  • Current
  • Charge
  • Power
  • Voltage