Amazfit¶

Active¶

Active Edge¶

Active Max¶

Support for this watch was added without access to the device. It should work, but was not tested at all. If you confirm it works or face any issues, please open an issue or reach out on Matrix.

Active 2¶

Support for this gadget was added on pull request #4629. The premium NFC version is also supported as of issue #4827.

Support for the square version was added to the nightly without access to the device. It should work, but was not tested at all. If you confirm it works or face any issues, please open an issue or reach out on Matrix.

Balance¶

Balance 2¶

Support for this gadget was added without access to the device. It was confirmed to be working on matrix.

Band 5¶

Essentially the same as Mi Band 5 but with extra VO2 max sensor.

Band 7¶

Tested with firmware versions: 1.10.31.1, and hardware versions: 0.99.21.5.

Bip¶

This gadget acts almost like the Mi Band 2, and almost all features that work on the Mi Band 2 already work for Amazfit Bip.

When powered up for the first time, the gadget demands that you connect in via the official vendor app. This is not necessary, you can get started with Gadgetbridge only.

Supported features by Gadgetbridge:

• Rejecting phone calls
• Ignoring calls
• Weather forecast
• Full text notifications with icons
• Export of activities with GPS and HR data
• Flash new watchfaces (with the firmware update tool)
• Use button for actions

Bip 3¶

Support for this gadget was added based on feedback from pull request #3627, but is not extensively tested.

Bip 3 Pro¶

Support for this gadget was added in issue #3249, but is not extensively tested such as firmware and watchface updates.

Bip 5¶

Support for this gadget was added in pull request #3258, without access to the device. It was confirmed to be working on matrix.

Bip 5 Unity¶

Support for this gadget was added without access to the device. It was confirmed to be working on matrix.

Bip 6¶

Support for this gadget was added based on feedback from issue #4715.

Tested with firmware versions: 3.0.6.2

Bip Lite¶

Bip S¶

The Amazfit Bip S is an improved Version of the original Amazfit Bip. It has a few hardware changes and software improvements:

• 64 (RGB222) instead of 8 colors (RGB111), however the new screen is not as readable in low-light environments as the old one, but looks much nicer when the background light is enabled than the original Bip screen.
• Music controls officially supported.
• Better HR Sensor.
• World clock (not yet supported in Gadgetbridge).
• Many more activities supported.
  • Including swimming.
• 5ATM water resistance.
• Bluetooth 5.0.
• (probably more)

There are a few protocol changes in comparison to the original Bip, and support in Gadgetbridge is not yet on par with the original Amazfit Bip. Bip S is working mostly in the same way regular Amazfit Bip does.

Bip S Lite¶

Bip U¶

Bip U Pro¶

Cheetah¶

Both round and square variations are supported.

Support for this gadget was added in pull request #3258. The round version was confirmed to be working in issue #4394. The square version was confirmed to be working in issue #5551.

Cheetah Pro¶

Support for this gadget was added with pull request #3251.

Cor¶

This gadget uses the same system-on-chip like the Amazfit Bip, and the firmware acts almost identically.

Cor 2¶

This gadget is very similar to the Amazfit Cor. We do not have the gadget at it is largely untested.

Falcon¶

Support for this gadget was added in pull request #3258, without access to the device. It should work, but was not tested at all. If you confirm it works or face any issues, please open an issue or reach out on Matrix.

GTR¶

Confirmed to be working on issue #3809.

GTR 2/2e¶

Confirmed to be working on issue #4284.

GTR 3¶

Tested with firmware versions: 7.46.1.1, and hardware versions: 0.84.19.19.

GTR 3 Pro¶

Tested with firmware versions: 8.45.7.1, and hardware versions: 0.83.19.2.

GTR 4¶

Tested with firmware versions: 3.8.5.1, 3.17.0.2, 3.18.1.1, and hardware versions: 0.102.19.1.

GTR Lite¶

GTR Mini¶

Tested with firmware versions: 5.2.18.1.

GTS¶

Confirmed to be working on issue #5391.

GTS 2/2e¶

Confirmed to be working on issue #5306.

GTS 2 Mini¶

GTS 3¶

Tested with firmware versions: 7.42.5.1, and hardware versions: 0.76.17.4.

GTS 4¶

GTS 4 Mini¶

Added based on feedback from issue #5472.

GTS 4 Mini New¶

Helio Ring¶

Added based on feedback from issue #5127. It is not yet heavily tested. While this device does not have a screen, it looks to use the same protocol as other Zepp OS devices.

Helio Strap¶

Added based on feedback from Matrix. It is not yet heavily tested. While this device does not have a screen, it looks to use the same protocol as other Zepp OS devices.

Neo¶

The Amazfit Neo has a simple monochrome LCD and an advertised battery life of ~28 days, which makes it much more like a regular watch than a smartwatch. Nonetheless it has sleep tracking and a heart rate sensor. Unlike some other Amazfit watches it uses a beeper instead of a vibrator.

Most features were added in pull request #2117 but a few features are not supported yet.

Supported features by Gadgetbridge:

• Notifications
• Find phone / watch
• Set alarm
• Live heart rate
• Set time format
• Most "display items" are displayed
• Download/sync activity data
• Setting automatic heart rate measurement interval
• Synchronizing time
• Weather
• Enabling/disabling beeps
• Inactivity notification
• Workout screen (feedback needed)
• PAI (feedback needed)

Does not work:

• Disconnect notification

Pop¶

Pop Pro¶

T-Rex¶

T-Rex 2¶

T-Rex 3¶

Support for this gadget was added without access to the device. It was confirmed to be working on matrix.

T-Rex 3 Pro¶

Added based on feedback from issue #5533. Both 44mm and 48mm versions are supported.

T-Rex Pro¶

T-Rex Ultra¶

Support for this gadget was added with pull request #3258.

Verge Lite¶

X¶

Essentially the same as Amazfit Band 5 but without the extra VO2 max sensor.